|
|
Enron Mail |
I've found that one of the best places to get what you want is at a travelling computer show. There is one that goes to Vallejo, Concord and Santa Rosa that I know of and if you go this route I recommend that you ask other people at the show who they think the most reliable people are. The prices are really good and you find a lot of Asus, Intel and AMD stuff plus name brand products and software. It's a good idea to know the specs ahead of time so you can make sure you're getting what you need. Go to the website, marketpro.com to get more information if you're interested.
-----Original Message----- From: Dasovich, Jeff [mailto:Jeff.Dasovich@ENRON.com] Sent: Tuesday, November 13, 2001 10:25 PM To: Avram Siegel; rory@carmelnet.com; eldon@direcpc.com Subject: RE: On-line Computer Component Info Suffice to say, Avram, you've explained it a helluvalot better than I did. I think I got as far as, "he wants to build a computer-based, digital recording extravaganza." Anyway, I'm responding because you replied only to me instead of "reply to all." Rory, Eldon, here's the dope. I can hardly wait to hear the response. Best to all, Jeff -----Original Message----- From: Avram Siegel Sent: Tue 11/13/2001 7:30 PM To: Dasovich, Jeff Cc: Subject: Re: On-line Computer Component Info Hey Jeff - Thanks for getting the word out there, and hi to everyone checking in. So here's the deal, I want to build a DAW (digital audio workstation) - a computer for multi-track audio recording and mixing etc... I've been researching this for a while but have just gotten more serious about it in the last couple of weeks, partly because I lucked into a nice piece of hardware (indefinate loan from a friend). An 8 to 10 channel interface called a Delta 1010 which gives me a nice head start. From what I have read so far, it seems that there are some specific requirements for a machine to be solid and reliable. It needs to be fast (not so hard these days, but the faster the better within my budget). It needs to be paired down - anything running in the background like power-management schemes can cause pops and clicks while you're recording and extraneous hareware uses system resources. And it should have a seperate, fast and large hard drive just for the audio data (typically a SCSI drive). I'm finding a lot of recomendations against buying something off the shelf like a Dell or whatever. Mostly, I think, to have more control over the specific components and also to cut down on a lot of the unnecessary (to audio recording) integrated accessories that those computers tend to have. Also, I'm kind of looking forward to building it myself. I like that kind of thing and it would mean I know how the thing works. Here's the plan I'm formulating at this point. I'm thinking of putting together a dual processor system with the fastest pentium IIIs I can afford. There doesn't seem to be all that big a price range between the different speeds just now - probably because they're yesterday's news with the P4s out there. (By the way the Pentium 4s have not been getting the best reviews in the audio world - from what I can tell - and I don't think there's a dual processor motherboard for them yet. Also, I think they are more expensive.) For this I need to come up with a motherboard. The one that I've come up with so far is an Asus Tek CUV4X-D but I'm new to all this and I don't even know what I don't know as far as what's out there so any suggestions are welcome. Also I know I need a fast SCSI (ideally, 10,000rpm or better, data trasnsfer rate of 80MB per second, sustained transfer rate of at least 24MB per second or better, and a seek time of 6ms or less - as quoted in one of my sources). Of course I need a pile of memory but I understand that it's pretty cheap right now. There also seems to be a debate going on about AMD's CPUs these days. Hopefully I can save some money going low end on stuff like the monitor, the keyboard, and anything else that doesn't directly pertain to audio recording because I actually am on a budget . Maybe there are some elements that I can even save for an upgrade. I am willing to spend what I need to, though, because if this works well it could make for a more affordable way to record True Blue's upcoming cd than going into a regular studio. So there you have it in a rambling kind of way. I appreciate any info you all can offer. For instance I really don't know what the cheapest source for all this stuff is and there are probably plenty of issues that I'm totally ignorant of. Clearly, all this points to the old saying about a little knowledge being a dangerous thing. - Avram ----- Original Message ----- From: Dasovich, Jeff <mailto:Jeff.Dasovich@enron.com< To: Dasovich, Jeff <mailto:Jeff.Dasovich@enron.com< ; Avram Siegel <mailto:avramnallison@home.com< ; rory@carmelnet.com ; eldon sellers (E-mail) <mailto:eldon@direcpc.com< Sent: Tuesday, November 13, 2001 8:43 AM Subject: RE: On-line Computer Component Info Thought I'd add Eldon, too, since he likely has some ideas and information, too. -----Original Message----- From: Dasovich, Jeff Sent: Tuesday, November 13, 2001 10:43 AM To: 'Avram Siegel'; 'rory@carmelnet.com' Subject: On-line Computer Component Info Hi Avram. Meet Rory, Prentice's brother and computer guru-type. Rory and I talked a little bit about what you're looking for, so I thought I'd just go ahead and facilitate a little chat room here. Avram, could you explain one more time to Rory exactly what it is that you're looking for, just to make sure that I've accurately and adequately described the situation? Rory has some ideas. Best, Jeff ********************************************************************** This e-mail is the property of Enron Corp. and/or its relevant affiliate and may contain confidential and privileged material for the sole use of the intended recipient (s). Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender or reply to Enron Corp. at enron.messaging.administration@enron.com and delete all copies of the message. This e-mail (and any attachments hereto) are not intended to be an offer (or an acceptance) and do not create or evidence a binding and enforceable contract between Enron Corp. (or any of its affiliates) and the intended recipient or any other party, and may not be relied on by anyone as the basis of a contract by estoppel or otherwise. Thank you. **********************************************************************
|