|
|
Enron Mail |
Andy, do we have any intention of doing any integration with Tradespark at
this time? If we do I will get more involved in this otherwise we will just let the infrastructure team continue to run with this. Let me know, bbh -----Original Message----- From: Bob McAuliffe Sent: Tuesday, December 05, 2000 1:50 PM To: Bob Hillier Subject: FW: Tradespark Requirements I need to have another discussion about this with you . . . we need an application group to work on this, because there is quite a bit of application analysis that needs to be done. I found out that from an infrastructure perspective, this is much more than just a remote connection. It involves an application implemented in our environment, and applications deployed to the desktop. Is this something the e-commerce team needs to be involved in (I don't think it is), but probably more like Beth Perlman's team. Bob. -----Original Message----- From: "Matricciano, Marcello" <MMatricciano@espeed.com<@ENRON [mailto:IMCEANOTES-+22Matricciano+2C+20Marcello+22+20+3CMMatricciano+40espeed+ 2Ecom+3E+40ENRON@ENRON.com] Sent: Wednesday, November 29, 2000 11:12 AM To: McAuliffe, Bob Subject: FW: Tradespark Requirements Correction to previous e-mail: The equipment we would send to Enron would comprise of 2 Cisco 2600 Routers (1 for each circuit), 2 Cisco Hubs, 2 Sun Ultra 5s with 2 NIC cards each. Each Sun would connect to its own hub and router for redundancy and load balancing purposes. Sorry for the confusion. Marcello < -----Original Message----- < From: Matricciano, Marcello < Sent: Wednesday, November 29, 2000 11:49 AM < To: 'Bob McAuliffe' < Subject: Tradespark Requirements < < Bob, < At this present time TradeSpark intends on order 2 diverse 128K < dedicated digital Fractional T-1 circuits (1 from Westcomm, 1 from Cable & < Wireless). These circuits would terminate at a specific location within < your Comms Room. From there we would request to have the circuits extended < as to where our equipment would live. The standard equipment used in a < TradeSpark installation are as follows: 1) one Cisco 2600 Router, 2) one < Cisco 16 port Manageable Hub, 3) one Sun Ultra 5 with 2 interfaces: one < for us, one for your network. The Sun Ultra 5 does not come with a monitor < so the space requirements for this installation are minimal. The 2 < circuits would connect directly into the WIC cards on the router. No < modems are required. < Once the equipment is installed and tested we can begin the process < of connecting from your network. All we need from Enron is a network IP < address to configure onto the 2nd interface on the Sun box. All < interfacing is done via this interface. If there is a firewall between our < box and your network, our application requires TCP/IP bi-directional < ports 8000 and 9000 to be opened. Please feel free to call me @ (212) < 938-4726 if you have any further questions and/or issues. < < < Marcello Matricciano
|